
Coating Technology
- Electroplating and chemical coatings - 56 types (including gilding and electrolytic electroplating of conductive metal coatings on thermoplastics).
- coating thickness - at the request of the customer.
Types and maximum dimensions of parts to be coated
- zinc plated cyanide - 1300 x 500 x 300 mm;
- cadmium plating (cyanide, non-cyanide) - 1300 x 500 x 300 mm;
- sulphate and cyanide copper plating - 1000 x 500 x 300 mm;
- oxidation of chemical steel - 1000 x 500 x 500 mm;
- chemically oxide coating on aluminum - 1000 x 500 x 500 mm;
- phosphating of steel - 500 x 500 x 500 mm;
- anodizing aluminum in sulfuric acid - 1000 x 500 x 500 mm;
- anodizing aluminum in chromic acid - 500 x 500 x 500 mm;
- sulphate nickel plating - 500 x 500 x 300 mm;
- black nickel plating - 500 х 500 х 300 mm;
- chemical nickel plating - 300 х 300 х 300 mm;
- chrome plating - 500 x 500 x 300 mm;
- black chrome plating - 200 x 200 x 100 mm;
- electropolishing of stainless steel - 1000 x 700 x 300 mm;
- electropolishing of bronze - 200 x 100 x 100 mm;
- magnesium oxidation - 200 x 100 x 100 mm;
- silvering - 200 x 100 x 100 mm;
- palladium-100 x 100 x 100 mm;
- tin-bismuth - 500 x 500 x 300 mm;
- tin-lead - 500 x 500 x 300 mm;
- tinning - 500 x 500 x 300 mm;
- lead - 200 x 300 x 200 mm;
- lightening stainless steel - 500 x 300 x 200 mm;
- chemical passivation of copper - 500 x 300 x 200 mm;
- etching copper tubes - up to 1120 mm.
- Hot and cold cured paints
Technical capabilities
- painting of parts with a coating requiring drying over 60 ° C (dimensions no more than 1000 x 100 x 1000 mm);
- painting of parts with a coating that requires drying up to 60 ° C (dimensions no more than 5500 x 1500 x 1500 mm);
- painting with liquid enamels and paints of various brands (EP, PF, ML, NTs, KO, etc.);
- painting with various types of powder paints on structural elements, panels, brackets and other parts.
- Polymer powder coating.
- the dimensions of the parts to be coated are not more than 2900 x 900 x 1100 mm.
- Ionic plasma coatings (by condensation with ion bombardment).
- titanium nitride coating on cutting tools, machine parts, etc .;
- obtaining decorative and functional metal films with various combinations of gases (argon, acetylene, nitrogen, oxygen), various color shades, coatings with various properties (wear-resistant, antifriction, corrosion-resistant);
- units Bulat-ZT (1 pc.), Bulat-6 (6 pcs.), AIR-2M (1 pc.);
- workpiece size no more than 1000 x 670 mm - for sheet (0.5 - 1 mm thick), or a product with dimensions 900 x 150 x 150 mm.
- Magnetron coating method.
- application on metals, as well as on non-metals of metallized coatings;
- obtaining decorative and functional metal films with various combinations of gases (argon, acetylene, nitrogen, oxygen), various color shades, coatings with various properties (wear-resistant, antifriction, corrosion-resistant);
- installation ВСМР-1200 (Zelenograd), equipped with two arc evaporators (KIB method) and two magnetrons, which allow applying low-temperature coatings (at 40 - 59 ° С) for applying screening coatings (copper, aluminum, etc.) .) for plastic or similar parts used in radio electronics and other industries;
- the maximum dimensions of the item to be coated are 750 x 750 mm (depending on the configuration of the item).
- Gas-phase coating.
- applying tungsten coating to products.